Press Releases

Author: Created: 7/20/2010 RssIcon
Dyna-Purge News

Injection Molder Uses 50% Less Purging Material and Reduces Downtime With New Dyna-Purge® E2

By Dyna-Purge on 4/24/2012

Company samples new integrated polymer system on 3 different parts with exceptional results

Dyna-Purge Celebrates 30 Years of Innovation in Engineered Commercial Purging Compounds.

By Dyna-Purge on 4/24/2012
Company has served the plastics industry since 1982 with new and innovative purging products.

Dyna-Purge® Announces New & Improved Dyna-Purge® C to Purge High Clarity Resins Without “Milky Drag.”

By Dyna-Purge on 12/1/2011
Case studies show new formula lowered downtime by as much as 60% versus other purging products

Switch to New & Improved Dyna-Purge® M Reduces molders Purge Consumption by 30%

By Dyna-Purge on 6/21/2011
Company annualizes over $6,000 in savings using new formula of purging compound

Dyna-Purge® Announces New & Improved Dyna-Purge® M for Significantly Less Scrap and Faster Purging Times

By Dyna-Purge on 2/9/2011
Independent study demonstrates reduction in scrap by as much as 64% and lowered purging times by as much as 90% versus other purging products

Shuman Plastics Appoints Top Teh d.o.o. to Represent Dyna-Purge® Purging Compounds In Eastern Europe

By Dyna-Purge on 10/8/2010
Dyna-Purge® announces that it has appointed Top Teh d.o.o.  as the new distributor of Dyna-Purge® engineered thermoplastic purging compounds in the Balkans, Eastern Europe.

Switch To New & Improved Dyna-Purge® K Purging Compound Saves Injection Molder $78,749 Per Year

By Dyna-Purge on 10/1/2010
Improves changeover time to less than 11 minutes to increase productivity

Shuman Plastics Appoints GK Chemical Co. Ltd. to Represent Dyna-Purge® Purging Compounds In Vietnam

By Dyna-Purge on 8/30/2010
Dyna-Purge® announces that it has appointed GK Chemical Co. Ltd., Ho Chi Minh City, Vietnam,  as the new distributor of Dyna-Purge® engineered thermoplastic purging compounds in Vietnam.

Dyna-Purge® Announces New & Improved Dyna-Purge® K For Purging Low Temperature Resins

By Dyna-Purge on 6/30/2010
New & Improved Dyna-Purge® K, a low-temperature, non-abrasive, non-chemical engineered thermoplastic purging compound.  

Dyna-Purge® Announces New & Improved Dyna-Purge® P For Hot Runners

By Dyna-Purge on 2/1/2010
Advanced formulation with dual action scrubbing expands into tight channels and negative flow areas of hot runners -- excellent for quick color changes

Dyna-Purge® Announces New & Improved Dyna-Purge® X Engineered Purging Compound

By Dyna-Purge on 6/1/2009
Significantly lowers total cost-to-purge compared to other commercial purging products, according to laboratory trial results – also, ideal for purging bioplastics.

Shuman Plastics Completes Leadership Transition as 3rd Generation of Family Continues Tradition of Service

By Dyna-Purge on 6/1/2009
Company Chairman Charles E. Shuman officially retires as sons carry on his legacy of success in roles as president and executive vice president.

Switch to Dyna-Purge® M Engineered Purging Compound Saves Injection Molder $38,000 Per Year

By Dyna-Purge on 2/1/2009
Gains 360 hours of production annually as change results in time savings of 80%

Dyna-Purge® Announces New & Improved Dyna-Purge® SF Engineered Purging Compound

By Dyna-Purge on 9/1/2008
Lowers purging costs up to 46% compared to other commercial purging products, according to laboratory trial results

South Wales company acquires distribution of Dyna-Purge® in United Kingdom and Ireland

By Dyna-Purge on 2/1/2008
United Kingdom supplier/distributor C.J.P. Sales Ltd. will begin distributing Dyna-Purge® purging products to customers in the U.K. and Ireland.

Short-Run Molder Cuts Purging Downtime 83% and Lowers Purging Costs 46% Using Dyna-Purge® for Color and Material Changes

By Dyna-Purge on 6/1/2007
A plastics processor of injection-molded and blow-molded parts lowered its purging costs by 46% and reduced purging downtime by 83% after switching to Dyna-Purge®, according to a new report published by Shuman Plastics, Inc., manufacturer of the Dyna-Purge® line of engineered purging compounds.

New Case Study Reports How Blown Film Extruder Cut Scrap by 80% and Reduced Downtime by 50% by Purging with Dyna-Purge®

By Dyna-Purge on 6/1/2007
Plásticos Hidrosolubles, Rafelbunol, Valencia, Spain cut its scrap rate by 80% and reduced purging downtime by 50% after switching to Dyna-Purge®, according to a new report published by Shuman Plastics, Inc., manufacturer of the Dyna-Purge® line of engineered purging compounds.

"Our press releases will keep you informed as we continue to lead through innovation."