Dyna-Purge® B

Designed for Injection and Extrusion Blow Molding

DYNA-PURGE B is a non-abrasive, non-chemical engineered thermoplastic purging compound, formulated to flow naturally through the barrel and accumulator head. A non-melting but softening thermoplastic scrubs the screw and barrel, while the carrier matrix flushes away impurities.

Features and Benefits of Dyna-Purge® B

  • Excellent for color changes, resin changes, preventative machine maintenance, and before manual cleaning
  • Developed for purging through the barrel and die head with a minimum clearance of .025 inch (.65 mm)
  • Effective through a wide temperature range 320° F – 575° F (160° C – 302° C)
  • Easy to use- no process adjustment necessary- use at the resident resin processing temperature and RPM speed
  • Non-abrasive, non-melting but softening thermoplastic, which thoroughly loosens carbonized and degraded resin, allowing it to be flushed out of the system
  • Safe, non-hazardous, with no chemicals- ingredients are FDA compliant
  • Heat stable- recommended during shutdown and start-up
  • Low “cost-per-purge”- only small quantity needed to be effective
  • No mixing required- simply use “as is”
  • Unlimited shelf life

Dyna-Purge has been the top-performing purging compound for over 35 years! Our product line offers superior cleaning and economic value over in-house resins and other commercial purges. We invite you to sample Dyna-Purge at no charge, so you can start saving today!