|
  Home
Suggested Operating Procedures
Click the links below to see the suggested operating procedures.
Injection Molding
- DYNA-PURGE M*
- Wide Range of Resins
- DYNA-PURGE E*
- High-Temperature Engineering Resins
- DYNA-PURGE P
- Hot Runner/Hot Manifold
- DYNA-PURGE V*
- Rigid & Flexible PVC
- DYNA-PURGE C*
- Clear & Transparent Resins
- DYNA-PURGE K
- Low-Melt Resins (e.g. PP, TPO, TPE & TPR)
Extrusion and Blow Molding
- DYNA-PURGE SF
- Multi-Layer Film
- DYNA-PURGE F
- Single-Layer Film
- DYNA-PURGE X
- Profile & Sheet
- DYNA-PURGE M*
- Compounding
- DYNA-PURGE B
- Blow Molding
* These Dyna-Purge grades require a minimum clearance of .030 inch (.75mm) throughout the entire process,
including the nozzle or die. Dyna-Purge grades M, E, V, C & K also can be used for various extrusion applications at
the temperatures listed above and minimum clearance noted.
 Go Back to Top
|
