Home

Site Map

• Home Page
• See Dyna-Purge in Action!
• About Us
• Dyna–Purge Features and Benefits
• Customer Service
• Case Studies
• Colour Concentrate Compounder Reduces Downtime by 88% Using Dyna-Purge® Engineered Purging Compounds.
• Blown Film Extruder Reduces Scrap by 80% Using Dyna-Purge® Engineered Purging Compounds.
• Sheet and film extruder lowers its purging costs 75% after switching to Dyna-Purge®.
• Blow Molder Reduces Downtime by 83% and Lowers Purging Costs 46% with Dyna-Purge®.
• Injection moulder uses Dyna-Purge K to lower purging costs by 52% and downtime by 60%.
• Annual purging costs cut by $41,000 and purging time reduced by 75% when molder switches to Dyna-Purge®.
• Injection moulder cuts downtime by 83% and gains over 1,100 machine hours using Dyna-Purge® for changeovers.
• Injection molder uses Dyna-Purge® and saves $29,250 annually while cutting downtime by 67%.
• Extruder cuts downtime by 50% and improves cleaning performance purging with Dyna-Purge®.
• Short-run injection molder uses Dyna-Purge® to overcome purging challenges and cuts downtime by 57%.
• Extruder lowers purging costs by 68% and boosts productivity using Dyna-Purge®
• Moulder eliminates streaking in 15 minutes and lowers purging costs by 93% by using Dyna-Purge®
• Custom injection molder cuts downtime by 67% when using Dyna-Purge®, saving 240 labor hours annually.
• Injection molder saves more than $62,000 annually by using Dyna-Purge® for preventive maintenance.
• Dyna-Purge® Reduces Initial Scrap Rate for an Injection Molder
• Injection Molder Reduces Purging Costs 50% by Using Dyna-Purge®
• Dyna-Purge® Reduces Downtime 67% for an Injection Molder
• Partners
• Why Purge
• Lower Your Cost to Purge
• Comparing Purging Alternatives
• How Dyna–Purge Compares to Virgin/Regrind Resin
• How Dyna–Purge Compares to Chemical Purge Products
• How Dyna–Purge Compares to Other Mechanical Purge Products
• Plastics Additives & Compounding Article
• Injection Molding Magazine Article
• Cost-to-Purge Worksheet
• Request Information or Sample
• Product Information
• Grade Selection Guide
• Product Information Sheets
• Injection Molding
• DYNA–PURGE M
• DYNA–PURGE E
• DYNA–PURGE P
• DYNA–PURGE V
• DYNA–PURGE C
• DYNA–PURGE K
• Extrusion and Blow Molding
• DYNA–PURGE SF
• DYNA–PURGE F
• DYNA–PURGE X
• DYNA–PURGE M
• DYNA–PURGE B
• New & Improved Dyna-Purge® M
• Shutdown and Startup Procedures
• Suggested Operating Procedures
• Request Information or Sample
• Troubleshoot FAQ
• More FAQs
• Your Questions
• International Distribution
• Distributor Profile
• I am Interested in Becoming an International Distributor
• Articles, Press, News
• Articles
• Press Releases
• Newsletters
• Contact Us

 Go Back to Top